Golf irons are the most common types of golf clubs.Golf manufacturers specially design golf irons to send the ball on distances between fairway woods and hybrids. Basically, these types of clubs are the most represented in a player’s bag. In many cases at 7 clubs and traditionally numbering from 3 iron right to 9 iron. Golfer uses this type of golf club to hit the ball onto the green, from where it can be putted.
Golf irons have shorter shafts and smaller club heads than fairway woods. The iron’s head is made of iron or steel. The head’s primary feature is a large, angled face, also scored with grooves. . Generally, golf players use irons in a wide variety of situations. Typically it is used from the teeing ground on shorter holes, to extract the ball from hazards such as bunkers or even shallow water hazards.
Design of Golf Irons:
Traditionally maximum irons were forged from a piece of metal which produced a thin club head that matches a blade. Nowadays, the investment casting process enables producers to boost up the production of clubs’ balanced properties. This mass production process was first introduced by Ping Company. It also made it possible to take weight out of the black of the club head and allot it around the perimeter.
These perimeter-weighted irons made it so easy to gain compatible results even when striking the ball outside the “sweet spot” when compared with “muscle-back”, irons.
Generally, golf irons manufacturers design it to use on the fairway when golfers get nearer to the green. The longest iron used by many golfers is the 4-iron, which has a long shaft and a low loft of almost 25 degrees. A male golfer will hit a 4-iron 170 yards. But women’s clubs may have more loft and women will generally hit the golf ball shorter for each club.
The main element factor for accuracy on the golf course is to find out how long a player can hit each iron. Players usually use the driver of the tee, and fairway woods or hybrids for longer shots.
There is no official loft angle set for each iron. Iron’s loft angles vary from producers to producers. But in recent years, some golf companies have changed the loft of their irons.
Finding the right set of iron can make improvements to your game. There are so many types of irons with different specifications.
Types of Golf irons-
Forged Golf Irons:
The word forged means counterfeit or artificial. Basically forged irons are almost the same that the village blacksmith used to do. They absorb the metal into a rough or unsmooth shape and then hammered into the desired shape. The producer then has a verdant forged iron, which is a close approximation of the final club head. The carbon steel club head is then completed by milling, grinding, and polishing.
The final result is solid-looking, one-piece iron that has a consolidated sweet spot. Generally forged irons are aimed towards good players who place higher importance on the feel of the club and the ability to shape shots and control trajectory.
Cast Golf Irons:
Cast iron is the alternative to forged iron. This type of iron involves pouring the melted metal into a shape, which offers producers to make more complicated head designs. Because of this, cast irons are fitter to multi-material type irons, perimeter weighted, and complex. On the other hand, forged irons are not as cheap as casting irons because the casting process is easier and cheaper. For this reason, cast irons have a lower price tag.
Designs of Golf Irons:
Cavity Back Golf Irons:
A cavity back iron is a type of golf club that positions a cavity in the back of the head, concentrate more weight on the perimeter. By adding extra weight to the edges of the club head, producers are capable to increase the MOI or forgiveness of the club.
Generally, a larger club head will be paired with a thin club face, which indicates off centre shots fly longer and straighter than an off-centre shot with a blade iron. This increased forgiveness decreases feel and mean that the cavity back iron is more suited to mid to high golfer who benefits from the larger sweet spot.
Blade Golf Irons:
Manufacturers design blade irons for the better players and feature a much thin face, a thin top line, and a strong hitting area. Generally, blades deliver weight evenly throughout the whole head, producing a little “sweet spot” in the centre of the head.
Because much weight is placed backward the sweet spot, it delivers more feel and ability to form a shot than a cavity back, therefore blade irons are often mentioned as muscle backs.
Golf Iron Sets:
Usually, there up to 9 irons are in sets. In each set, the irons are numbered to correspond to the loft of the club. The long iron in a set is usually 2, 3, and 4 numbers. Although these days, it is quite uncommon to see a 2 or even a 3 iron.
Mid-irons, which are 5, 6, and 7, number and short irons are numbers 8, 9, and wedges for example pitching wedge, LW, and SW.
Hybrid Golf Iron Sets:
Basically, the hybrid iron sets progress from cavity back short iron, to decrease cavity mid-iron to part-iron/part-wood hybrid clubs, targeted at players struggling to hit longer irons.
The advantage of this type of set is very clear. The cavity-back short irons offer most control for shorter shots into greens. On the other hand the hollow back mid irons the weight of the club head lower and further back on the club to produce easily-hit high mid irons.
Finally, the long irons blend fairway wood distance with the control and accuracy of a long iron. This set could provide you the ideal mix to support your iron play for a high handicap or older player
Golf Iron Shafts:
In iron market, there are three type of iron shafts are available.
Graphite is not as common as steel in the iron market. But it can still be a great useful and advantageous because it is lightweight and flexible. It enables you to gain swing speed and possibly unlock a much better distance in your game.
But there are some drawbacks of graphite. The disadvantage of graphite is the feel from the shaft. A stiff graphite shaft will not feel like a stiff steel shaft and may indicate that through a graphite-shafted set of iron. The feels is not so consistent and reliable.
And the other drawback is the price. The production cost of graphite shafts is more expensive than steel. So the price of graphite shafts price is also more than steel shaft. But if you’re an older, junior, lady golfer who might prefer a light feeling club, your game will benefit by spending extra money.
In the previous paragraph, we mention graphite irons and also mention steel shafts, but did not tell more about it. Basically, the steel shaft is the most chosen shaft for irons. Steel is stronger and heavier than graphite. It means it produces less flex and is more compatible and appropriate.
The carbon or stainless steel is used in shafts is thick and offers compatible torque and flexibility, offering you to have the same flex and stiffness in your 4 iron as you have 9 iron. It is a more popular choice for all golfers because of its affordable price and high durability nature of the metal.
The multi-material shaft is quite an uncommon method of shaft production. This type of shaft is a mix up of both graphite and steel. It supposed to be made up mainly of steel, with a graphite tip. In multi-material shafts, the steel section delivers a solid shaft that offers a player to control the ball flight better.
The graphite tip gives a limited amount of ‘extra speed’ into the ball to produce better distance. The graphite tip also helps filter out any unnecessary vibrations at contact to optimize the feel of each shot.
Some Buying Guidelines:
It might sound like a fairly basic issue, but when it comes to choosing exactly which particular clubs you purchase, there are really several choices.
The most popular set of irons is from a 4 iron to a pitching wedge. Many better players can decide to purchase iron from 3 to 9 and leave space for adding specialist wedges. A weak or old golf player may decide to choose 5 irons to sand wedge leaving extra room for fairway woods and utility clubs in their golf bag in place of the longer irons while using more forgiving wedges provided within the set.
The main influence in choosing the make-up of your set is distance gapping. It means giving more attention to the distance in your bag where you usually hit any club, especially the distances between them. If you have any remarkable gaps, it may be enough you’re set enough.
Custom Fitting Method
Some major manufacturers offer a special service which is known as “custom fitting”. The opportunity to customize the iron specifications to suit your size and swing is a very effective option for buying clubs. They design maximum iron set for a player who is almost five foot ten inches (180) tall If your height does not match, then you can be benefitted by applying the custom fitting method.
Fitting implies personalize or modifying the shaft length and lying as the taller you are the longer shaft you get. And you need a more upright lie. The stiffness of the shaft can also be adjusted to match your swing sped so that the club does not arrive too open or shut at impact. And the layout of the head can be adjusted to your swing and desired shots.
At the nearest shop, custom fitting can take almost 30-60 minutes. Some golf club manufacturers have fully equipped fitting centers with modern technology to fit you like a Tour Pro.
It will cost a little bit more than purchasing a normal club kit, however, if you end up buying a set of them, many manufacturers can do anything for free. Ultimately any small cost will possibly save your money in the long run, as you will have a perfectly suited for you.
You can try before you buy!
It is one of the greatest benefits of buying clubs today. It is the option to try clubs and experience demonstrations days. But we couldn’t recommend it highly. It’s nice to just pick the best clubs for you, but once you really use them to see how they hit, you can never be positive if you are having the right package.
Demo days where producers provide all golfers the option to test all their new products and get guidance on features and any other questions you might have. Some demo days even have custom fitting trucks with computer analysis equipment to experiment with your swing. And make you a club to order there and then.
Some Famous Golf Manufacturers:
There are so many famous golf irons manufacturer across the world.
1. TaylorMade: TaylorMade is one of the most famous golf manufacturers in the world. They are basically an American golf equipment manufacturer. The TaylorMade Golf Company has built a history of breaking from tradition to meet potential output thresholds since the first metalwood was produced in 1979. Driven to lead the product innovation industry, this industry is committed to testing new frontiers, pushing the borders of the processing of products. And the next significant change in golf is started seeking.
2. Callaway: It is also a famous American sports manufacturer. The company offers a number of global brands, including Callaway Golf, Odyssey, OGIO, TarvisMathew, and Jack Wolfskin. This Company manufactures and sells premium golf clubs, balls, golf bags, and other accessories with a complete dedication to creativity.
3. LAZRUS GOLF: LAZRUS Golf Company is one of the best golf club manufacturers in the world. They are a famous company for making golf irons, wedges and many more products.
4. Cleveland Golf: It is also a well-known golf maker, situated in America. Basically, Cleveland is a part of SRI Sports LTD. It is in California. It is the first-ever company that produces wedges with multiple bounce options.